Starting Design Architect

To open the Calc design in Design Architect, perform the following steps:

1. Select MGC Location Map Set Working Directory from the menu bar. A small dialog box appears at the bottom of the screen.
   
   
2. Type $XILINX_TUTORIAL/calc_sot in the Directory field of the dialog box, then select OK or press return. This sets the working directory to the directory where you work on the tutorial.
   
   
3. Select the $XILINX_TUTORIAL/calc_sot/calc design object in the Navigator window.
   
   
4. Select Right Mouse Button Open pld_da.
   
   The Design Architect window appears and displays the Calc design as shown in the following figure.
   
   

   Figure 10.2 Top-Level Schematic for Calc

5. Resize the Design Architect window to cover the entire screen.