Analyzing Nets from the Schematic

This section describes how to select and analyze nets within the pld_quicksim simulator.

You can probe nets in pld_quicksim by opening a schematic sheet and selecting a net. To trace the selected signal, follow these steps:

1. Select the (schematic view) Add Traces Selected menu path.
   
   A trace window is created with the selected signals.
   
   
2. You can list and monitor selected nets by selecting the (schematic view) Add Lists Selected and (schematic view) Add Monitors Selected menu items.
   
   

After you have set up a list of signals, you can save the list in a file to use in future pld_quicksim sessions. Refer to the pld_quicksim manuals from Mentor Graphics for detailed information on using the simulator and creating these files.